HOMEProductHorizontal Machining Center MVH & HMC Series
BACK TO OVERVIEW

Laurel/ MVH & HMC series

Advantage

Massive cast iron construction

+Our cast iron is internally reinforced with heavy ribs to resist flexing and damping vibrations.

One-piece constructed X,Z-axis

+With the new structure design of the one-piece X, Z-axis, the entire structural rigidity is dramatically increased. This also results in higher machine accuracy.

T-shaped base features with high stability

+The T-shaped base measures the width of the column and the depth of the saddle. Specially designed 580mm distance between linear guideways makes the machine perfect for heavy-duty machining. Inside the castings are the heavy-duty, anti-flex, vibration absorbing ribs that Hartford adds.

High rigidity one-piece column design

+With the use of HyperWorks Topology to conduct an optimum structure analysis and helps to optimize rib deployment for greater rigidity.

Auto pallet changing system is anchored on the base

+The APC of LAUREL machine is integrated on the machine base, free from any possibility of accuracy deviation.

BT-50 high speed built-in 10,000rpm spindle 

+With small, light noise and low vibration features.

+i-Tech intelligent spindle is available to intrgrate various smart functions such as i-Diagnosis, i-compensation, i-Balance and i-Protections that provide safty proteciton of the spindle, increase the spindle accuracy and reduce down time (opt.)

 

Specification

  • Machine Model
  • MVH-5, #50
  • Table

  • Working surface

    500x500 (19.69x19.69)

    mm (inch)

    Max. table load

    600 (1322.77)

    kg (lbs.)

  • Travel

  • Longitudinal travel(X-axis)

    720 (28.35)

    mm (inch)

    Cross travel(Y-axis)

    700 (27.56)

    mm (inch)

    Vertical travel(Z-axis)

    650 (25.59)

    mm (inch)

  • Spindle

  • Spindle nose taper

    ISO50

    Spindle speed(Gear)

    6000

    rpm

    Spindle speed(Built-in)

    opt. 10000

    rpm

  • Feed

  • Rapid traverse rate(X/Y/Z)

    40/30/40 (1574.8/1181.1/1574.8)

    m/min (ipm)

  • ATC

  • Tool storage

    40 opt. 60/90/120

    pcs

  • Machine Model
  • HMC-6
  • Table

  • Working surface

    630x630 (24.8x24.8)

    mm (inch)

    Max. table load

    600 (1322.77)

    kg (lbs.)

  • Travel

  • Longitudinal travel(X-axis)

    750 (29.53)

    mm (inch)

    Cross travel(Y-axis)

    700 (27.56)

    mm (inch)

    Vertical travel(Z-axis)

    650 (25.59)

    mm (inch)

  • Spindle

  • Spindle nose taper

    ISO50

    Spindle speed(Gear)

    6000

    rpm

    Spindle speed(Built-in)

    opt. 10000

    rpm

  • Feed

  • Rapid traverse rate(X/Y/Z)

    40/30/40 (1574.8/1181.1/1574.8)

    m/min (ipm)

  • ATC

  • Tool storage

    40 opt. 60/90/120

    pcs

  • Machine Model
  • HMC-8
  • Table

  • Working surface

    800x800 (31.5x31.5)

    mm (inch)

    Max. table load

    1500 (3306.93)

    kg (lbs.)

  • Travel

  • Longitudinal travel(X-axis)

    1000 (39.37)

    mm (inch)

    Cross travel(Y-axis)

    850 (33.46)

    mm (inch)

    Vertical travel(Z-axis)

    950 (37.4)

    mm (inch)

  • Spindle

  • Spindle nose taper

    ISO50

    Spindle speed(Gear)

    6000

    rpm

    Spindle speed(Built-in)

    opt. 10000

    rpm

  • Feed

  • Rapid traverse rate(X/Y/Z)

    30/30/30 (1181.1/1181.1/1181.1)

    m/min (ipm)

  • ATC

  • Tool storage

    40 opt. 60/90/120

    pcs

  • Machine Model
  • HMC-10
  • Table

  • Working surface

    1000x1000 (39.37x39.37)

    mm (inch)

    Max. table load

    2000 (4409.25)

    kg (lbs.)

  • Travel

  • Longitudinal travel(X-axis)

    1300 (51.18)

    mm (inch)

    Cross travel(Y-axis)

    1000 (39.37)

    mm (inch)

    Vertical travel(Z-axis)

    1150 (45.28)

    mm (inch)

  • Spindle

  • Spindle nose taper

    ISO50

    Spindle speed(Gear)

    6000

    rpm

    Spindle speed(Built-in)

    opt. 10000

    rpm

  • Feed

  • Rapid traverse rate(X/Y/Z)

    30/30/30 (1181.1/1181.1/1181.1)

    m/min (ipm)

  • ATC

  • Tool storage

    40 opt. 60/90/120

    pcs

  • Machine Model
  • HMC-600
  • Table

  • Working surface

    630x630 (24.8x24.8)

    mm (inch)

    Max. table load

    600 (1322.77)

    kg (lbs.)

  • Travel

  • Longitudinal travel(X-axis)

    750 (29.53)

    mm (inch)

    Cross travel(Y-axis)

    700 (27.56)

    mm (inch)

    Vertical travel(Z-axis)

    650 (25.59)

    mm (inch)

  • Spindle

  • Spindle nose taper

    ISO50

    Spindle speed(Gear)

    6000

    rpm

    Spindle speed(Built-in)

    opt. 10000

    rpm

  • Feed

  • Rapid traverse rate(X/Y/Z)

    40/30/40 (1574.8/1181.1/1574.8)

    m/min (ipm)

  • ATC

  • Tool storage

    40 opt. 60/90/120

    pcs

  • Machine Model
  • HMC-800
  • Table

  • Working surface

    800x800 (31.5x31.5)

    mm (inch)

    Max. table load

    1500 (3306.93)

    kg (lbs.)

  • Travel

  • Longitudinal travel(X-axis)

    1000 (39.37)

    mm (inch)

    Cross travel(Y-axis)

    850 (33.46)

    mm (inch)

    Vertical travel(Z-axis)

    1000 (39.37)

    mm (inch)

  • Spindle

  • Spindle nose taper

    ISO50

    Spindle speed(Gear)

    6000

    rpm

    Spindle speed(Built-in)

    opt. 10000

    rpm

  • Feed

  • Rapid traverse rate(X/Y/Z)

    30/30/30 (1181.1/1181.1/1181.1)

    m/min (ipm)

  • ATC

  • Tool storage

    40 opt. 60/90/120

    pcs

  • Machine Model
  • HMC-1000
  • Table

  • Working surface

    1000x1000 (39.37x39.37)

    mm (inch)

    Max. table load

    2000 (4409.25)

    kg (lbs.)

  • Travel

  • Longitudinal travel(X-axis)

    1300 (51.18)

    mm (inch)

    Cross travel(Y-axis)

    1000 (39.37)

    mm (inch)

    Vertical travel(Z-axis)

    1150 (45.28)

    mm (inch)

  • Spindle

  • Spindle nose taper

    ISO50

    Spindle speed(Gear)

    6000

    rpm

    Spindle speed(Built-in)

    opt. 10000

    rpm

  • Feed

  • Rapid traverse rate(X/Y/Z)

    30/30/30 (1181.1/1181.1/1181.1)

    m/min (ipm)

  • ATC

  • Tool storage

    40 opt. 60/90/120

    pcs

Application Example

Go to Top